Equates to 0.1 bars per metre. The overall width of the taps including the control handles is 26cms. The body itself is 18cms wide, 4.7cms deep and 3.5cms high. The spout reaches some 10.5cms from the body and is 4.2cms wide.
The centre of the legs to the tip of the spout measures some 19.5cms. The taps come with Round style Deck-mounting'legs' which are attached to the back of the taps using the nuts on the back of the taps. These nuts have a 150mm centre to centre measurement, however the distance between the inlet centres at the base of the'pillar' legs is some 180mm. The legs come with securing nuts/washers. The left control knob (as you look at the front of the taps) controls the water on/off using 1/4 Turn Ceramic Disc technology. The hot inlet is also on this side. The right control knob is the temperature control. This is Thermostatic for comfort and safety, and there is an override stop button set at 38 degrees C. The cold inlet is nearest this control knob. If ever needed we usually stock these Thermostatic cartridges. This Valve will work on the following: Combination boiler / Gravity fed / Pumped hot water unvented hot water / Standard hot water cylinder type systems.The maximum unbalanced water pressure ratio is 5:1. Please also note that various Shower sets with Handheld Shower Heads, Flexi Hoses, Adjustable Sliding Rails, Rigid Riser'exposed' sets etc. We also sell the wall-mounted version of these taps without the legs (ref: 057SQ). The item "DECK MOUNTED THERMOSTATIC BATH SHOWER MIXER TAPS, SQUARE STYLE, 1/4 TURN, 057SQD" is in sale since Sunday, February 2, 2020.
This item is in the category "Home, Furniture & DIY\Bath\Showers, Baths & Parts\Bath Taps & Thermostats". The seller is "ourtapscom" and is located in Bournemouth. This item can be shipped worldwide.